VMware Server 2.0.2-x On Ubuntu Server 10.04 With VMware Remote Console Plug-in
Today I will tell you how to set up a new Ubuntu 10.04 server which runs VMware server 2.0.2-x and the VMware Remote Console Plug-in. With VMware Server you can create and run guest operating systems ("virtual machines") such as Linux, Windows, FreeBSD, etc. under a host operating system. This has the benefit that you can run multiple operating systems on the same hardware which saves a lot of money, and you can move virtual machines from one VMware Server to the next one (or to a system that has the VMware Player which is also free).
Installing And Using OpenVZ On Ubuntu 10.04
In this HowTo I will describe how to prepare an Ubuntu 10.04 server for OpenVZ. With OpenVZ you can create multiple Virtual Private Servers (VPS) on the same hardware, similar to Xen and the Linux Vserver project. OpenVZ is the open-source branch of Virtuozzo, a commercial virtualization solution used by many providers that offer virtual servers. The OpenVZ kernel patch is licensed under the GPL license, and the user-level tools are under the QPL license.
Installing A Multiserver Setup With Dedicated Web, Email, DNS And MySQL Database Servers On Debian 5
This tutorial describes the installation of an ISPConfig 3 multiserver setup with dedicated web, email, database and two DNS servers all managed trough a single ISPConfig 3 control panel. The setup described below uses five servers and can be extended easily to to a higher number of servers by just adding more servers. E.g. if you want to have two mailservers, do the setup steps from chapter 2 on both of these servers. If you want to set up more web servers, then install ISPConfig on all other web servers in expert mode except of the first one.
Using iSCSI On Ubuntu 10.04 (Initiator And Target)
This guide explains how you can set up an iSCSI target and an iSCSI initiator (client), both running Ubuntu 10.04. The iSCSI protocol is a storage area network (SAN) protocol which allows iSCSI initiators to use storage devices on the (remote) iSCSI target using normal ethernet cabling. To the iSCSI initiator, the remote storage looks like a normal, locally-attached hard drive.
The Perfect Server - OpenSUSE 11.3 x86_64 [ISPConfig 2]
This is a detailed description about how to set up an OpenSUSE 11.3 server (x86_64) that offers all services needed by ISPs and hosters: Apache web server (SSL-capable), Postfix mail server with SMTP-AUTH and TLS, BIND DNS server, Proftpd FTP server, MySQL server, Dovecot POP3/IMAP, Quota, Firewall, etc. In the end you should have a system that works reliably, and if you like you can install the free webhosting control panel ISPConfig 2 (i.e., ISPConfig runs on it out of the box).
Installing A Web, Email, MySQL DB Cluster (Mirror) On Debian 5 With ISPConfig 3
This tutorial describes the installation of a clustered web, email, database and DNS server to be used for redundancy, high availability and load balancing on Debian 5 with the ISPConfig 3 control panel. GlusterFS will be used to mirror the data between the servers and ISPConfig for mirroring the configuration files. I will use a setup of two servers here for demonstration purposes but the setup can scale to a higher number of servers with only minor modifications in the GlusterFS configuration files.
Installing Nginx With PHP5 And MySQL Support On OpenSUSE 11.3
Nginx (pronounced "engine x") is a free, open-source, high-performance HTTP server. Nginx is known for its stability, rich feature set, simple configuration, and low resource consumption. This tutorial shows how you can install Nginx on an OpenSUSE 11.3 server with PHP5 support (through FastCGI) and MySQL support.
How To Upgrade OpenSUSE 11.2 To 11.3 (Desktop & Server)
This guide shows how you can upgrade your OpenSUSE 11.2 desktop and server installations to OpenSUSE 11.3.
Fedora 13 Samba Standalone Server With tdbsam Backend
This tutorial explains the installation of a Samba fileserver on Fedora 13 and how to configure it to share files over the SMB protocol as well as how to add users. Samba is configured as a standalone server, not as a domain controller. In the resulting setup, every user has his own home directory accessible via the SMB protocol and all users have a shared directory with read-/write access.
Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP)
LAMP is short for Linux, Apache, MySQL, PHP. This tutorial shows how you can install an Apache2 webserver on an OpenSUSE 11.3 server with PHP5 support (mod_php) and MySQL support.
Installing Lighttpd With PHP5 And MySQL Support On Fedora 13
Lighttpd is a secure, fast, standards-compliant web server designed for speed-critical environments. This tutorial shows how you can install Lighttpd on a Fedora 13 server with PHP5 support (through FastCGI) and MySQL support.
name: MAGPIE